Tell me why I don't like Mondays...
I don't really need to tell you when I can show you...
My piece decided it wanted to have a go at flying when I introduced it to the pumice wheel. I had been doing fine for most of that day on a flat felt wheel to get the flat surfaces all polished up with pumice. Some one else needed to use it so I went on the the brush wheel to polish off the curvier surface. I was going quite well until the tip got caught in the bristles and the wheel pulled it out of my hands launching it into the metal trough under the wheel breaking off the tip of the piece and scratching the piece a little too. 
I was left in tears and shock for a little while. I'm really glad I have some lovely friends around to take care of me and cheer me up with chocolate. I managed to pull myself together faster than I expected I would have at the moment I felt the piece pull away from my hands and smash, it's a wounder what chocolate and a bit determination can do.
I had also decide last week that if I got this piece finished I would submit it to the international glass festival for the student prize. So at the end of last week I was preparing to get photos done and finish filling out forms, for this reason I really waned to push on and get the piece finished. After a little break me Dave and Jo had a little conference about what could be done with the piece (binning it was not an option, not that I would have done that anyway) We decide to try to follow the flow from the curves in the piece and curve off the edge by carving it down on the diamond wheel.
I couldn't get this done straight away like I would have wanted to because Simon the only one able to change the diamond wheel wheel wasn't in, so I tried to think of something else to get on with and keep positive about this piece.
I carved a plaster modle a couple of weeks ago but with all the polishing I had almost forgoten about it to I dicided that I would eventually like to get this into glass and so started cutting up all of my gelflex I could find and start soaking the plaster. Also I have a feeling over the next few week people are going to be after all the equipment they can get their hands on so I'm better off getting it done now so I can get some waxes out in the week and make some moulds to dry over the easter holidays.
When cutting up the gexflex I suspected that I wouldn't have enought to fill my mould. I found this to be true when pouring the gelfex into the mould. As the gelflex statered to cool I tried using a stick to push the gelfex up over the bit of the mould that wasnt completlyey covered. This shouldn't be too much of a problem, when the gelflex has cooled I will pour over some plaster this will keep the shape and stiffen the mould.
On a positive note the gelfelx didn't bubble.
Also during the week I managed to get two waxes done and in moulds.
While I was gelfexinging I also got a wax from my two part mould from the other week and set up some boards to make a two part mould. Not quite sure what I'll do with it yet but, I have thought about carving into the glass surface with the diamond wheel rather than making the modle and carving it first and making multiples of the one shape. If I were to carve the glass insted I could make it so every piece is a one off. I might cast this with clear glassma and have a go if I have time or I haven't come up with any better ideas to work on over the holidays. Alternitivly I could use the gaffer colours and polish like in my other pieces so that the contrast is between the the form and the shapes within the glass rather than, the contrast in the form. I don't think that the colours and the flow within the clours of the glass seem to suit the form very well. Or if I don't do any of this keep the mould cast it later and polish in my own time then sell it when I've finished university when I've finally thought about what I want to do with the piece.
Anyway back to mould making, when making this mould I found out that we wer out of HT, so insted I would need to use fiber strands. So the mixture for this mould was 4liter of Water mixed with 2.8kg of Plaster, 2.8kg of Silica and 4 spoon fulls of fiber strands. The mix filled the mould very nicely no excess, yay.
Carving
After some work on on the diamond wheel, linisher and the pumice wheel I managed to alter the piece to a form I was happy with. Originally I wanted the piece to stand with the wave underneath but when I was polishing I started looking at the piece from different angles and thought that this way suited the piece best and in a way I thought it looked a little like a butterfly wing, very pretty. The shape also looks like a wave now and the clours really add to it. I'm really proud I managed to do something with the piece even after it got broken. Some people have even said how much they prefer the way this one looks to the way it was before, they are probably being nice. I like it any way :)
Now to get it cleaned up and photographed...
Any feed back on this would be really great, I think I need to make the text size a little bigger, but I thought the image was pretty good, but still not that sure.
I had a go at photoshopping my piece I submitted for the international glass festival, I think this images looks alot better...oh well
This is a close up of one of my pieces. It was looking a bit dark so its just been brightned up a bit, havent done much with it but I still think it a nice image.
I am thinking about using this as the images for my buisness cards.
It's me again :)
Additional Information 
It's Me! 
My piece decided it wanted to have a go at flying when I introduced it to the pumice wheel. I had been doing fine for most of that day on a flat felt wheel to get the flat surfaces all polished up with pumice. Some one else needed to use it so I went on the the brush wheel to polish off the curvier surface. I was going quite well until the tip got caught in the bristles and the wheel pulled it out of my hands launching it into the metal trough under the wheel breaking off the tip of the piece and scratching the piece a little too. 
I was left in tears and shock for a little while. I'm really glad I have some lovely friends around to take care of me and cheer me up with chocolate. I managed to pull myself together faster than I expected I would have at the moment I felt the piece pull away from my hands and smash, it's a wounder what chocolate and a bit determination can do.
I had also decide last week that if I got this piece finished I would submit it to the international glass festival for the student prize. So at the end of last week I was preparing to get photos done and finish filling out forms, for this reason I really waned to push on and get the piece finished. After a little break me Dave and Jo had a little conference about what could be done with the piece (binning it was not an option, not that I would have done that anyway) We decide to try to follow the flow from the curves in the piece and curve off the edge by carving it down on the diamond wheel.
I carved a plaster modle a couple of weeks ago but with all the polishing I had almost forgoten about it to I dicided that I would eventually like to get this into glass and so started cutting up all of my gelflex I could find and start soaking the plaster. Also I have a feeling over the next few week people are going to be after all the equipment they can get their hands on so I'm better off getting it done now so I can get some waxes out in the week and make some moulds to dry over the easter holidays.
While I was gelfexinging I also got a wax from my two part mould from the other week and set up some boards to make a two part mould. Not quite sure what I'll do with it yet but, I have thought about carving into the glass surface with the diamond wheel rather than making the modle and carving it first and making multiples of the one shape. If I were to carve the glass insted I could make it so every piece is a one off. I might cast this with clear glassma and have a go if I have time or I haven't come up with any better ideas to work on over the holidays. Alternitivly I could use the gaffer colours and polish like in my other pieces so that the contrast is between the the form and the shapes within the glass rather than, the contrast in the form. I don't think that the colours and the flow within the clours of the glass seem to suit the form very well. Or if I don't do any of this keep the mould cast it later and polish in my own time then sell it when I've finished university when I've finally thought about what I want to do with the piece.
